Versión en español · Guide by views (the manual) · MIDI reference
The features now live in the manual by views. Each one is a section of the chapter of the guide by views where it is used, with its drawings and its animations. This page is the glossary: the features under the groups of the former feature list; each title leads to its section of the guide and names its chapter.
Conventions. Pads 1-32 from top left to bottom right (row 1 = 1-8 … row 4 = 25-32). Knobs K1-K4 on top and K5-K8 at the bottom. “Shift + X” = hold Shift while using X. The colours of the diagrams are approximate; a dim pad is drawn translucent. Anything not described here works as on the original device (see Novation’s official user guide).
A. Shortcuts and usability
- A1 Shortcut map · View: 0.2 Buttons that work in every viewEvery shortcut of the mod on a drawing of the device: double presses, Shift + button, Clear + knob and the special pads of each view.
- A2 Master FX on the Mixer button · View: 6.1 Master FXFrom the Mixer, Mixer again opens Master FX; any other view button leaves it.
- A3 Keys of the FX view · View: 7.1 FX viewOctave ▲ / ▼ = delay / reverb sends; Shift + knob = reverb and delay parameters. Duplicate = reset (sends to 0, master filter centred, Master FX off); Shift + Octave ▲ / ▼ = master filter resonance ±16 (since RC4; before, 1-16 / 17-32); Shift + pad 25 = master filter off / on (since RC4).
- A4 Clear + knob = default value · View: 0.2 Buttons that work in every viewHold Clear and turn a knob right: it goes back to its default. The LED turns lavender (the original's blue). On the drums, turned left it deletes the automation of the stock knobs (red LED), as on the original. Also on the MIDI track engine and in Master FX.
- A5 Switch off latched effects (Master FX pad 8) · View: 6.1 Master FXPad 8 switches off everything latched with Shift (effects and song pointer) and bypasses the FX; touching a latched effect releases it.
- A6 Synth source view · View: 2.3 Synth source viewWith Synth 1 / 2 on screen, press its button again: pads 25-29 pick the source (noise, inputs, inverted inputs), pad 30 = step-drummer.
- A7 Chromatic and scale view of the drums · View: 5.3 Chromatic and scale view of the drumsShift + Preset with a drum: the pads play the sample in the scale; K1 = pitch offset, Shift + K1 = cents; Note view: pads 25-28 = drums 4-1.
- A8 Pack management on the device · View: 5.2 Drum Preset viewSave also writes the samples replaced by captures to the card. Duplicate + pad A + pad B (Drum Preset) swaps two samples; between packs it copies samples and synth patches; Clear, the pack, Clear (packs view) deletes a pack.
- A9 Replace a drum with the capture · View: 5.2 Drum Preset viewDrum Preset view: Clear + pad twice = that sample becomes the capture (until you save or reload).
- A10 CC editor of the MIDI macros · View: 3.7 CC editor of the MIDI macros (pad 25)MIDI 1 / 2 Preset view, pad 25: move a knob and change its CC / NRPN on the device; pad 26 = save.
- A11 Mixer: Shift + knob = level to 100 / 0 · View: 9.2 Mixer view and scenesMixer view: Shift + a knob turned right sets that track’s level to 100; turned left, to 0.
- A12 Cue mode, mutes on the bar and quantize (since RC2) · View: 9.2 Mixer view and scenesSince RC2. Mixer, pan page: Shift + knob = cue mode (the right output listens to the tracks you choose). Shift + pads 1-8 of the Mixer = mute / unmute on the next bar. Shift + Play = quantize the pattern of the selected track.
- A13 LFO synced to the tempo (since RC4) · View: 0.2 Buttons that work in every viewSince RC4. The LFO rate knobs are bipolar: right = a free LFO, left = synced to the tempo with the cycle on the bar's first beat.
- A14 Split keyboard Synth 1 + Synth 2 · View: 2.1 Synth 1 / 2 track view (Note, Velocity, Gate)Since RC2. Hold Synth 1 and press Synth 2 (or the other way round): the two top rows play the synth you held first and the two bottom rows the other one; since RC2.02, any pair of Synth 1, Synth 2, MIDI 1 and MIDI 2.
- A15 Synth patch colours · View: 2.4 Synth 1 / 2 Preset viewFrom RC2 to RC4.08 every patch of the Synth 1 / 2 Preset view was drawn by its voice mode. Since RC4.10 the colours are the original's: those card reads sometimes loaded the initial patch. Alpha 7.01 only: each patch in the colour of its Components category.
- A16 Patches of the own synth (MIDI 1 / 2) · View: 3.1 MIDI 1 / 2 Preset viewSince RC2. In the Preset view of MIDI 1 / 2, rows 2 and 3 are 16 patch slots of the track engine: touch = load (the root note sounds), Clear + pad twice = save, Duplicate + A + B = exchange; Octave ▼ / ▲ = the pages (since RC4: 8 pages, 128 slots per pack; before, 4 pages, 64 slots).
- A17 Saving the synth’s patch into the pack · View: 2.4 Synth 1 / 2 Preset viewSince RC2. In the Preset view of Synth 1 / 2: Clear + pad asks (it blinks white) and Clear + the same pad again saves the patch as it sounds into that slot.
- A18 Macro knob destinations · View: 2.3 Synth source viewSince RC2. In the synth source view (A6), pad 32 opens the editor: a knob picks its macro, Octave ▼ / ▲ steps the field and the pads draw the number.
- A19 Copying projects to another slot or another pack · View: 10.1 Projects viewSince RC2. In the Projects view: Duplicate + pad A picks the project (it blinks yellow) and Duplicate + pad B copies it into that slot, of the same pack or of another one.
- A20 Own-synth patches to another pack · View: 3.1 MIDI 1 / 2 Preset viewSince RC2. In the Preset view of MIDI 1 / 2: Duplicate + slot A, load another pack and Duplicate + slot B copies the patch (engine, parameters and name).
- A21 Shift = a flash on every note (Alpha 7.01 only) · View: 0.2 Buttons that work in every viewWith Shift held, each track's button flashes white on every note it plays.
- A22 Shift + Preset = the project's sound (Alpha 7.01 only) · View: 0.2 Buttons that work in every viewShift + Preset brings the track's sound back to the one saved in the project.
B. Exposed controls
- B1 Drum knobs as printed on the panel · View: 5.1 Drum track view (knobs)Every knob does what its label says, with a second layer on Shift: ring mod, envelopes, filters (DJ, BP, notch, comb (not in Alpha 7.01), tilt), LFO, start point, bitcrush and distortion.
- B2 Reverb and delay parameters · View: 7.1 FX viewFX view, Shift + knob: reverb (type, decay, damping) and delay (time, sync, feedback, width, ratio, slew); saved with the project.
- B3 Side-chain and master compressor on the knobs · View: 8.1 Sidechain viewSince RC2. In the Sidechain view (Shift + FX): K1-K4 = attack, hold, decay and depth of the side-chain of the chosen track; K7 / K8 = attack and release of the master compressor.
- B4 Recording the internal MIDI routes · View: 1.1 Setup viewSince RC2. In the Setup view, Record decides whether what a MIDI track sends to an internal synth over a shared channel is also recorded into that synth: yellow = yes, dark = no (the default).
- B5 MIDI for everything new · View: 11.4 MIDI: own behaviours, new CCs and NRPNsThe new values go out and come in over MIDI: CC / NRPN of the MIDI track engine, NRPN of the drums (MSB 5-8) and of Master FX (MSB 9, channel 16).
- B6 Automation of the MIDI engine · View: 3.3 Knob pages of the MIDI 1 / 2 engineWith Record + Play, the 8 values of page 4 of the MIDI engine are recorded into the macro lanes of the pattern.
- B7 Setup and device MIDI · View: 1.1 Setup viewChannel 16 Rx / Tx (pad 16), shared channels, internal loopback without a cable and reverb / delay returns through strips 3 / 4 (pads 22 / 23, cream / peach like the reverb and delay of the FX view). since RC2: MIDI Thru with four modes (Duplicate in Advanced Setup): Thru, Out 2, Merge (DIN In + the device’s MIDI) and Filter (DIN In without the channels the device listens to). since RC2: own Program Change channels: pads 29 / 30 show and pick the listen / output channel (16 by default); what is received is forwarded on the output one. since RC2: metronome with count-in: Shift + Clear walks no metronome, metronome, count-in only and both; the count-in is one bar before recording. since RC4: General MIDI mode of the drums: in Setup, K4 turns it on; K5-K8 = the GM note of Drum 1-4 (35-81), sent on the drums' channel instead of 60 / 62 / 64 / 65.
- B8 Patch flip on MIDI 1 / 2 · View: 3.1 MIDI 1 / 2 Preset viewPad 26 of the MIDI Preset view: every note is sent as a Program Change (exclusive with the track engine).
C. New control modes
- C1 Patch morph (Alpha 7.01 only) · View: 2.4 Synth 1 / 2 Preset viewAlpha 7.01 only. In the Preset view of Synth 1 / 2 or MIDI 1 / 2 (own synth, with its 8-operator FM): hold two to four patches for 0.4 s and a knob moves from one to the next, with LFOs, an envelope and a slow morph.
- C2 Engine of the MIDI tracks (pad 27) · View: 3.1 MIDI 1 / 2 Preset viewSince RC2.08: an external keyboard on the channel of MIDI 1 / 2 (USB or DIN) plays its own synth; its notes are not sent again to the MIDI out. Pad 27 of the MIDI 1 / 2 Preset view picks the engine: off, line, oscillator, VA-drum, granular, sample (since RC2), FX sequencer and, since RC4, FM. Since RC4 a tap opens them as a row on pads 17-24 (tap one to pick it; before, each tap stepped to the next) and Shift + pad 27 steps to the next. Pads 1-5 pick the knob page; 28 = two oscillators, 29 = chain order, 30 = step-drummer, 31 = velocity (VA-drum). since RC2: Clear + a page pad = the values of that page back to their initial values; rows 2-3 hold patches (A14).
- C3 Step-drummer · View: 3.8 Step-drummer viewSequencing by pairs of steps on top of the pattern: pads 1-16 steps, 17-24 destination / macro, the 8 knobs = the 8 pairs (pitch or velocity). MIDI: Preset view, pad 30. Synths: source view, pad 30. While recording, the steps you play are recorded in real time.
- C4 FX sequencer · View: 3.8 Step-drummer viewBlue state of pad 27: the step-drummer of the track picks, for each pair of steps, a slot of the Master FX bottom row (0 = none); it plays on the steps with a note. The knob moves slowly (one slot every ~48 steps of the turn) and lights in the colour of the chosen effect. A slot with no effect assigned plays, since RC4, the effect at the top of its column (pad 26 = Master FX pad 1 … pad 30 = pad 5), with its knobs; before, it did nothing: assign the effects to the Master FX bottom row (see “Assignable bottom row”). since RC2: at the end of the travel there is the random value (white LED): on every step with a note one of the list plays at random (the slots with an effect assigned and the mechanical gesture of pad 31).
- C5 Song pointer (Master FX) · View: 6.1 Master FXPads 9-24 = steps 1-16: one held step = retrigger; two steps = momentary phrase. Phrase mode (a latched phrase): Shift + step = start (end 16); a touch = the end; Shift + another step = new start; Shift + the start or the white pad 9 = exit.
- C6 Captured sample · View: 6.1 Master FXPad 32 (red) records the output; pad 7 (yellow) plays it: K1 pitch, K2 mode (one-shot / gate / loop by colour), K3 start, K4 end. The sample can be assigned to the bottom row (pad 7 + a bottom pad) and can replace a drum (A8).
- C7 Glitch (pad 6) and its assignment · View: 6.1 Master FXHold pad 6 of Master FX: the output breaks up and lags like a tape. K1 speed, K2 repeat, K3 delay, K4 chaos (lower half) or overload (upper half). Pad 6 held + a bottom-row pad = that slot is a Glitch too, with its copy of K1-K4.
- C8 Assignable bottom row (Master FX / FX) · View: 6.1 Master FXHold an effect of the top rows (or pad 7, or pad 31) and touch a bottom pad: that slot stores the effect with a copy of its parameters. Saved with the project.
- C9 Random-mutate per step · View: 4.3 Probability view (note tracks and drums)Since RC2. In the probability view, in mode 2 (pad 25 of Pattern Settings), row 4 gives each step a chance of its notes jumping an octave or moving to another note of the scale when they play.
- C10 Step frequency and dynamics · View: 4.3 Probability view (note tracks and drums)Since RC2. In the probability view of the note tracks: row 4 = every how many plays of the pattern the step sounds (1-8). With pad 25 of Pattern Settings: row 3 = random dynamics (velocity, position and length), row 4 = random-mutate.
- C11 Pattern chains and scenes · View: 9.1 Patterns view and pattern chainsSince RC2. Every pattern can carry a rule “play n times, then jump to B; the next time, to C”. Shift + Octave ▲ / ▼ in the Patterns view switches the chain mode of the whole project on / off; every scene remembers the mode it was saved in.
- C12 Pattern mutate (Alpha 7.01 only) · View: 9.1 Patterns view and pattern chainsAlpha 7.01 only. Ported from the Pattern Mutate in mefisme's Rhythm Plus (MIT licence). In the Patterns view or the Mixer, Shift + a tap on Duplicate gives each selected track a short list of patterns from its chain, in another order, that loops in place of the chain. The patterns themselves don't change.
- C13 Nudge and play orders · View: 4.1 Pattern Settings viewSince RC2. In the Pattern Settings view: pad 26 = Nudge (moves the content of the selected steps), pad 27 = fractal order, pad 28 = deconstructed order. On every track, drums included.
- C14 Arpeggiator (since RC2) · View: 4.1 Pattern Settings viewSince RC2. In the Pattern Settings view of a note track: Shift + pad 25 = the pattern's arpeggiator on / off, Shift + pads 27-32 = its order (fractal, deconstructed, up, down, ping-pong, random), independent of the pattern's direction.
- C15 Drums micro-step rollers (since RC2) · View: 5.3 Chromatic and scale view of the drumsSince RC2. Rows 1-3 of the drums' Note view: holding a roller plays its drum on every step at that micro step (two columns per drum, micro steps 1-3 and 4-6), live; with the transport stopped, at the project's tempo.
- C16 Custom scale (since RC2) · View: 2.2 Scales view and custom scaleSince RC2. Shift + Scales = an editor of a custom scale for the note tracks: up to 7 notes over the root and any period (up to 24 semitones) that is the root of the next iteration; every row of pads is one iteration (two with 4 notes or fewer). Saved with the project.
- C17 Chord screen (since RC4) · View: 2.1 Synth 1 / 2 track view (Note, Velocity, Gate)Since RC4. In the expanded Note view of Synth 1 / 2 and MIDI 1 / 2, Shift + pad 8 opens the chord screen: row 1 the type, row 2 the inversion and the modifiers, rows 3-4 the roots; each root plays its chord while it is held.
- C18 Stereo drum pairs (since RC4) · View: 5.1 Drum track view (knobs)Since RC4. Hold Drum 1 and press Drum 2 (or Drum 3 + Drum 4): Drum 1 / 3 sounds on the left and Drum 2 / 4 on the right with the next sample, both driven by Drum 1 / 3's controls and pattern; Drum 2 / 4's knobs = stereo width (K2), detune (K1) and deviations. Saved with the project.
- C19 The drums' extra lane (Alpha 7.01 only) · View: 5.1 Drum track view (knobs)Alpha 7.01 only. Each drum has one more automation lane, kept in the spare bits of each step of its pattern (it travels with Duplicate, Nudge and Shift + Play). From the factory it carries the chromatic pitch (the chromatic view's pads record there; the pitch lane stays K1's); Record held + a knob assigns another parameter and Record held + a chromatic pad brings back the chromatic pitch.
- C20 Sample mode of the MIDI tracks (since RC2) · View: 3.9 Sample mode and sample pickerSince RC2. A new state of pad 27 (teal, after the granular): the MIDI track plays a pack sample one-shot, at the note's pitch (C3 = note 60 = as recorded), through the engine's filter, effect and LFO; the VCA stays open and the sample plays to its end. The expanded Note view (Note twice) is the picker: rows 3-4 = 16 samples × 4 pages (Octave ▼ / ▲: all 64 of the pack), rows 1-2 = the steps; a held step + a sample = that step's sample flip, also live with Record.
- C21 Mod matrix of the own synth (since RC2.02) · View: 3.4 Mod matrixSince RC2.02. With the MIDI 1 / 2 engine on, pad 6 of its Preset view is a new knob page: K1-K8 = eight sources (velocity, note, random per note, LFO 2, envelope 2, a drum hit, the pattern position, stepped random). Each knob's position is the destination (every parameter of the knob pages, 33, one stretch each, in its page's colour) and, inside the stretch, the amount. Slow knobs: two clicks a step, 16 steps a destination.
- C22 Jump sequencer of MIDI 1 / 2 (Alpha 7.01 only) · View: 3.1 MIDI 1 / 2 Preset viewThe notes of a MIDI track make another track's pattern jump to the step they indicate.
- C23 4-operator FM (since RC4) · View: 3.5 4-operator FMSince RC4. A variant of the oscillator of the MIDI 1 / 2 own synth: pad 24 of the engine row (a tap on pad 27), violet; its knobs on pad 7. K1-K4 = the ratio of operators 1-4 (with a fine detune on each ratio's clicks), K5-K8 = their level; Shift + K1-K4 = to the right its attack, to the left the operator percussive with its own decay; Shift + K5 = the algorithm (16; also by holding pad 7: pads 9-24 are the algorithms, a press picks one and plays it), Shift + K6 feedback, Shift + K7 noise, Shift + K8 release (longer with more velocity).
- C24 8-operator FM (Alpha 7.01 only) · View: 3.6 8-operator FMAlpha 7.01 only. It replaces the 4-operator FM on pad 24 of the engine row: up to 8 operators, each with a DX7-style envelope (4 rates, 4 levels), and 56 algorithms (the 4-operator FM's 16, the DX7's 32 and 8 with eight operators). 4-operator FM patches load converted, with the same sound. FM page = pad 7 (with the engine row closed): pads 9-16 = operator 1-8 (the ones the algorithm uses lit: carriers green, modulators light blue), pad 3 = the pitch envelope (violet). K1 ratio (0.5 … 31 or fixed in Hz), K2 fine, K3 level, K4 velocity, K5-K8 rates R1-R4; with Shift K1 algorithm, K2 feedback, K3 rate scaling, K4 level scaling, K5-K8 levels L1-L4.
- C25 Wavetable (Alpha 7.01 only) · View: 3.1 MIDI 1 / 2 Preset viewAlpha 7.01 only. Pad 21 of the engine row (sand) = the oscillator reading a wavetable: both oscillators, the FM / ring / sync between them, the filter, the VCA, polyphony and the voice modes stay as they are. One table per patch, up to 9 frames, for both oscillators; each its own position: K3 of the OSC 1 / OSC 2 page (WAVE; in Beta 5.24-5.26, K7), K7 = LFO → position, Shift + K3 = envelope → position. SHAPE (K2) and envelope / LFO → shape (K4 / K6) = warp, a bend of the phase.
- C26 Master FX since RC2: mechanical gesture, Glitch, Digitise and saving per session · View: 6.1 Master FXSince RC2. Pad 6 of Master FX is the Glitch and pad 31 a mechanical gesture (tape stop, scratch…); Digitise gains K3 = momentary send to the delay and K4 = envelope; the Master FX knobs and slots are saved with every project.
D. DSP
- D1 Master FX effects · View: 6.1 Master FXGater, Auto-Filter LP / HP, Digitise, Phaser and Glitch on the master output, with 4 parameters each.
- D2 VCA-VCF of the MIDI tracks · View: 3.3 Knob pages of the MIDI 1 / 2 engineDJ / LP / HP 12 and 24 dB / band pass / notch filters, effects (saturation, folding, wavefold, ring, comb, chorus), VCA with ADSR and LFO.
- D3 Oscillators and paraphony · View: 3.3 Knob pages of the MIDI 1 / 2 engineContinuous morph sine → triangle → saw → square, wavefold / slope / width, second oscillator with FM, ring, soft sync and bitwise modes; two paraphonic notes.
- D4 VA-drum engine · View: 3.3 Knob pages of the MIDI 1 / 2 engineOscillator made for percussion: one-shot VCA, dedicated decay envelopes for pitch (Sustain knob) and filter (Release knob), white noise and random values instead of the LFO.
- D5 Granular synth · View: 3.3 Knob pages of the MIDI 1 / 2 engineUp to 16 grains per track from any sample of the pack or the capture, with interpolation and window. K1 pitch, K2 position, K3 scan / freeze, K4 size, K5 density, K6 zone, K7 LFO → position, K8 envelope → position; Shift: fine, sprays, reverse, window, slicer (or stretch, since RC2), LFO → size, source.
- D6 Glitch engine · View: 6.1 Master FXA tape head over a stereo circular buffer of the master (2.7 s): variable speed, repeats with fades, chaos.
- D7 Drum DSP · View: 5.1 Drum track view (knobs)Ring mod, pitch and filter envelopes, LFO, DJ / band pass / notch / comb (not in Alpha 7.01) / tilt filters, bitcrush, start point, distortions and sidechain between drums.
- D8 Audio inputs and returns · View: 2.3 Synth source viewLine input (normal or inverted) as a synth source; reverb / delay returns through strips 3 / 4 with feedback.
E. Miscellaneous
- E1 What is saved and where · View: 11.2 What comes back after a restart and where it is savedPattern, project, pack and device settings: what goes where, how to make sure it is saved and what is lost at power-off, in the «Data» chapter of the guide by views.
- E2 The internal memory pack: read only · View: 10.2 Packs viewNothing of the mod writes or deletes in the pack of the Circuit’s internal memory (the first one of the Packs view). You can read it and copy from it to a pack of the card, not the other way round.
- E3 Installing and going back · View: A.1 Installing and going back
rc_uploader.htmlpatches Novation's official firmware in the browser and sends it over Web MIDI; it only accepts the official firmware 1.2.1. Recovery: Scales + Preset + Note at power-on. - E4 Development and diagnostic tools · View: A.1 Installing and going backReproducible builders, ARM / DSP emulators with tests through the real routes,
verify_builds.py, remote diagnostics over USB (ctremote.py). - E5 MIDI tables · View: 11.4 MIDI: own behaviours, new CCs and NRPNsMIDI engine: CC 74/71/79/73/75/70/72/91/59/26/27/20/21/37/39/30/31/52/54 + NRPN 0:76 and 4:x; drums NRPN 5-8:1-14; Master FX NRPN 9:0-19 (channel 16).